2021 Dodge Challenger Mopar Drag Pak
2021 Dodge Challenger Mopar Drag Pak

2021 Dodge Challenger Mopar Drag Pak

At the heart of the new Drag Pak is the latest evolution of the supercharged 354-cubic-inch Gen-III HEMI V-8 engine, based on the same power plant that won the 2018 NHRA Factory Stock Showdown (FSS) and NMCA Factory Supercar championships. A unique, serialized, red and chrome Drag Pak badge sits atop the machined aluminum supercharger cover. Also under the aluminum hood, enthusiasts will see a nod to past 1970-1974 ‘Cuda and Challenger heritage models, with a special red and chrome radiator support “fender tag” adorned with the silhouette of the Dodge Challenger Mopar Drag Pak, stating the series number, the vehicle code, axle ratio and engine designation – all unique to the Drag Pak. New for 2021 are exclusive double-adjustable Drag Pak-specific tuned Bilstein coilover shock absorbers supporting all four corners of the car.

2021 Dodge Challenger Mopar Drag Pak
2021 Dodge Challenger Mopar Drag Pak

Numerous enhancements include an all-new 3.0-liter Whipple twin-screw supercharger, upgraded forged internals, new front accessory drive and a new fabricated aluminum ice tank with a clear lid that cools the supercharger intercooler. The engine combination has been fully validated by Mopar engineers on the dyno, as well as the drag strip, and is approved for the NHRA FSS and NMCA classes. The all-new, four-link rear suspension is engineered to launch hard, quickly decimate the 60-foot elapsed times and stay planted all the way down the quarter-mile. A new geometry setup with longer control arms increases the length of the rear swing arm, allowing better anti-squat control and increasing stability. It also incorporates a wishbone link for lateral control (replacing a Panhard bar in prior models) and a larger-diameter anti-roll bar (250 percent stiffer than prior models).

2021 Dodge Challenger Mopar Drag Pak
2021 Dodge Challenger Mopar Drag Pak

Rounding out the Factory Stock racing class feel on the interior are custom-cut lightweight carpeting, carbon fiber tube protectors and SFI-compliant roll bar padding. The interior balances race car function with factory comfort and technology. On the passenger side, a custom red and chrome Drag Pak serialized badge signifies the one-of-50 build sequence numbers. Driver comfort is achieved with the adjustable mounts that are included for the seats and racing pedals. Driver control is delivered through a mechanical floor shifter and lightweight steering column with quick-release steering wheel.The instrument panel features a carbon-fiber bezel with three primary gauges – rpm, brake pressure and oil pressure. The driver bezel also features a Holley EFI Digital Dash with a 7-inch, low-glare, full-color touchscreen display so drivers can tune and manage vehicle performance.

2021 Dodge Challenger Mopar Drag Pak
2021 Dodge Challenger Mopar Drag Pak

An all-new motorsport electrical architecture setup includes the “brains” of the supercharged HEMI powertrain in the programmable Holley Dominator Electronic Fuel Injection (EFI) vehicle-management system. In addition, a programmable Racepak Smartwire Power Distribution Module controls all electrical components using solid-state electronics, which eliminates the need for fuses and relays. These electronic modules are conveniently mounted to the body using bespoke mounts that allow for easy service with factory fit-and-finish. The new Drag Pak features an all-new roll cage fabricated to SFI Specification 25.5C (NHRA-certified 7.50-second ET) to not only handle the rigorous safety requirements of factory stock racing, but also improve performance. The NHRA-certified roll cage is constructed from 4130 chromoly tubing and is fully TIG-welded, ensuring greater safety and integrity. This integrated chassis approach is a result of Mopar’s involvement in different classes of drag racing over the years, as well as the stringent approach to safety mandated by the NHRA.

2021 Dodge Challenger Mopar Drag Pak
2021 Dodge Challenger Mopar Drag Pak

The new Drag Pak comes standard in White Knuckle and is available in five optional high-impact exterior colors: Hellraisin, Pitch Black, Smoke Show, TorRed and Frostbite. Full-color or monochromatic graphics packages are anchored by the Mopar logo and additional “drag pak” or “direct connection” billboard graphics on the quarter panels above the rear wheels. The graphic band wraps around the rear of the car, visually connecting both sides of the vehicle. A wide center stripe, with tracers on each side, runs from the edge of the front fascia, over the roof and through to the rear edge of the decklid. The graphics highlight the width of the Drag Pak and complements the variety of stripe packages that Mopar offers for the Dodge Challenger. The graphic band runs along the lower quarter of each side of the Drag Pak, accented by a tracer line.

2021 Dodge Challenger Mopar Drag Pak
2021 Dodge Challenger Mopar Drag Pak

Source: Dodge, Reviews

To set PICTURE/PHOTO as wallpaper background on your desktop, click on the IMAGE to save 2021 Dodge Challenger Mopar Drag Pak images on your desktop computer. Right click on the picture/photo you have saved and select the option “Save image as” or “Set As Background”. This 2021 Dodge Challenger Mopar Drag Pak images is provided only for personal use as wallpaper on computers, smartphones or other display devices. If you found any images copyrighted to yours, please contact us and we will remove it. We don’t intend to display any copyright protected images.

Gallery for 2021 Dodge Challenger Mopar Drag Pak

Leave a Reply